Iron stove

Iron Stove

◾︎Size: W182mm x D115mm x H230mm

◾︎Material: Stainless steel (SUS430), partially brass

◾︎Color: Black

◾️Weight: 2.2kg

 

Flames that flicker differently from a campfire

Gazing at the gently swaying flames of the Iron Stove allows you to relax as if freed from your busy daily life.

Its decorative shape adds a historical ambiance to any space.

The vintage design of the Iron Stove is characterized by the beauty of its retro feel, and simply placing one instantly creates a stylish atmosphere.

This very compact stove can be used on a tabletop.

It's an excellent product that provides three functions (heating, cooking, and lighting) on a single table. It's useful when you want to reduce luggage for solo camping or when you want to watch the flames within arm's reach.

 

 

Relax and enjoy the outdoor atmosphere on your balcony

It can be used in situations other than outdoor scenes. Sometimes you want to experience the outdoor feeling even if you can't go camping. In such cases, the easy-to-use Iron Stove can create an outdoor atmosphere in your garage or on your balcony.

1. Pour oil into the main unit.

Use the included silicone hopper.

Filling it completely may cause oil leakage, so please refill it to about 350ml.

 

2. Open the window or the top of the unit and ignite with a burner, match, etc.

If the wick is too long, soot may be generated.

Adjust the wick length to about 1mm to 2mm from the metal fitting before igniting.

 

3. Close it firmly and adjust the height to prevent soot from coming out.

4. Turn the dial to extinguish.

*If there are residual embers, blow on them to extinguish.

 

*For flame ambiance, usability, and safety, we recommend using "paraffin oil".

*Do not use highly volatile or flammable fuels such as gasoline or alcohol.

*When using a new wick, it takes about 15 minutes for the fuel to fully permeate the wick, so please ignite after the fuel has permeated.

*When using kerosene, preheating is required for about 10 minutes after igniting the wick. The flame may become slightly larger during preheating, so please adjust the flame height after it stabilizes.

*Always empty the fuel tank when moving.

*If the wick falls into the tank

 

1. Remove the top part of the main unit.

2. Unscrew the four bolts with a 2mm hex wrench.

3. Remove the metal fitting and take it out from inside the tank.

 

 

 

*For outdoor use only.

*When starting to use, do not ignite until the fuel has completely soaked into the wick, which takes about 10 minutes.

*When using kerosene, preheating is required for about 10 minutes after igniting the wick. The flame may become slightly larger during preheating, so please adjust the flame height after it stabilizes.

*Maintain a level position and keep the main unit upright during use and transport.

*If the wick is used without being completely soaked in oil, it will quickly carbonize.

*Paraffin oil is recommended as fuel for safety and minimal soot. Do not use gasoline, alcohol, lighter fluid, or gas.

*Pour approximately 3/4 of the fuel into the tank. Filling it completely may cause oil leakage.

*Always drain the oil when transporting. Oil leakage may occur.

*If the wick is saturated with oil, oil may leak. Drain the oil when not in use, such as for display or storage, not just during transport.

*If black smoke is observed during use, check the fuel and wick length. If the wick is too high, black smoke is more likely to occur. *During combustion, the glass part and top of the unit become very hot. Be careful of burns.

*To extinguish, adjust the wick with the control knob to put out the flame, then confirm that it is completely extinguished. Be careful not to lower the wick too much, as it may fall into the fuel tank.

*Replacement glass and wicks can be purchased separately. Please inquire at our online shop.

【Accessories】

・Wicks ×2 (1 installed, 1 spare)

・Ignition fitting ×1 (1 installed)

・Silicone hopper ×1 (foldable oil funnel)

・Storage bag ×1 (Size: 205mm x 170mm x 255mm)